Home › Forums › QRP Transceivers › MTR 5b quit working… Probably too much pwr. › Reply To: MTR 5b quit working… Probably too much pwr.
July 14, 2016 at 11:14 am
#3149
QRPME
Participant
Steve,
If you have the means, you might try removing the two side screws, knurled nuts over phone and key jack and separate bottom cover. Remove the battery for 60 seconds. Put it all back together and set the cw vox back to 300ms our so. If that doesn’t work you may have fried the display? 12 volts max i believe.