LD-11 Connectors

Home Forums QRP Transceivers LD-11 Connectors

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #3184
    G3TBL
    Member

    Hi All,
    Does anyone know the pin details of the Phone, Mic and Key connectors? I want to connect my headset and want to check the pin wiring is ok. Also I am using a dynamic mic on the headset so hopefully this will work fine?

    73
    Ray
    G3TBL

    #3457
    KB1BBY
    Member

    I seriously doubt a dynamic mic will work fine with the LD-11 transceiver. I am just another end user, who has acquired a slightly used LD-11 transceiver on eBay auction. I have found that the hand mic supplied with the transceiver is most certainly an electret element mic, which I have replaced with a smaller electret hand mic. I have rewired my spare M-206S hand mic, which was originally supplied with my earlier production Chinese FX-9A transceiver. It is a better size match for the LD-11 transceiver and works quite well. The mic wiring of the 3.5mm mic jack is very simple. The lower shank of your 3.5mm mic plug is common ground. The center section is +PTT and the very tip is +Audio. As for the exact size specifications of the DC power jack, it appears I need to pull out my digital calipers, because getting any real answers on this forum appears to be problematic at best. KB1BBY Scott.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.