LD-11 Digital filters

Store Forums QRP Transceivers LD-11 Digital filters

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #3140
    kb7ysy
    Member

    The manual shows how the SSB and CW filters can be changed while in the service mode. No mention is made of the Digital filters. All 4 of the digital filters are configured at 3.35 kHz. I would like to configure one at 2 kHz and another at 500 Hz, but I don’t know how to access the menu or if it even exists.
    73
    Jim Barbre
    KB7YSY

    #3143
    QRPME
    Participant

    Power the radio off. While holding the “finction” key, power the radio up. Release the function key when it powers up. But be very careful. There are things in there that will render the radio dead.
    Power the radio off after setting your filters. When you power back up, you will have to reset your user settings again. AGC, CWVox, WPM, Pitch etc.

    #3144
    kb7ysy
    Member

    I did that. I did not see an option for DIGITAL filters, only for SSB and CW ones.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.