n7mka

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • in reply to: Clicks and Pops when tuning LD-5 #2599
    n7mka
    Participant

    I sent my unit back to LNR and they took a look at it. Very good customer service. They did indeed determine that there are occasionally these types of transients that are caused by one of the chips in the radio as it can take 10msec for the PLL to lock onto a new frequency. This is normal. They are sending it back. I am satisfied with the result.

    in reply to: Power Supply Suggestions for LD-5 #2581
    n7mka
    Participant

    I purchased the Pro Audio Engineering KX3 power supply that is being mentioned above and it does work well. I put Anderson Power Pole connectors on it to connect to the red and black power wire from LNR.

    in reply to: Clicks and Pops when tuning LD-5 #2572
    n7mka
    Participant

    Nick – This happens on position 1 on the VFO tuning. But only on very specific frequency transitions.

    in reply to: Clicks and Pops when tuning LD-5 #2527
    n7mka
    Participant

    LNR is working on this. I have no doubts that they will resolve it.

    in reply to: LCD contrast on LD-5 #2412
    n7mka
    Participant

    I think that there used to be an adjustment for that if you look in the manual from 6-15-15.
    Backlight brightness of the LCD from 0 to 250
    Marty
    N7MKA

    in reply to: Digital Modes on LD-5 #2408
    n7mka
    Participant

    I am also interested in how to do PSK31.
    Marty

    in reply to: Power Supply Suggestions for LD-5 #2407
    n7mka
    Participant

    Well – I bought the 4200mAh LiFePO4 battery from HobbyKing and a balance charger and I have all of the terminals converted to Anderson Powerpoles. I just turned the radio on for the first time last night just to test it so I do not have any operating data yet. I am also thinking of getting the power supply that is sold for the KX3 by Precision Audio Engineering. I will add more details when I have done some operating.

Viewing 7 posts - 1 through 7 (of 7 total)