NEW PRODUCT for 2021 The MTR4B V2 4-Band Mountain Topper
KD1JV "Steve Weber" Designs - Produced by LNR Precision
80M, 40M, 30M, 20M
The LNR Precision MTR transceivers are designed to be efficient portable CW rigs. Whether climbing a mountain and operating SOTA or just out for an afternoon in the park, the MTR’s small size, light weight and meager battery requirements makes it a great choice for these activities.
Dimensions: 5.150″ Length x 3.0″ Wide x 1.075″ Thick
Weight: 7.95 oz
Switch selected 80/40/30/20 meter bands (no band modules to lose or change out)
Heavy Duty Slide Switches
Machined Aluminum Enclosure
Four bands – 80M, 40M, 30M and 20M
Very low receiver noise floor
Low current for maximum battery life
Wide operating voltage range – 5.5V to 13V
Full 5W “QRP” gallon with 12.0 Volt supply
2 line, back lighted LCD display
SWR – RF Power display
Built in Real Time Clock
Internal Iambic B mode keyer, 5 to 31 WPM in 1 WMP increments.
Three Morse message memories with beacon mode
80 meter, 40 meter, 30 meter and 20 meter operation.
Receiver sensitivity : ~ 0.5 uV
Receiver audio bandwidth: ~ 400 Hz centered at 600 Hz.
Receiver current: ~ 27 ma
Transmit output power: 5 watts typical at 12.0 Volt input
Transmit current: 750 ma Max with 5 watt output
Transmit spurious outputs: -50 dBc or better
Supply voltage 5.5 volts minimum, 13 volts maximum. 6 to 12 recommended.
Special Notes to read before ordering. Lead time is still at 2-3 weeks after placing your order and they will be shipped in the order that they were received. Please continue to be patient do not email us asking for when your order will ship. An automatic email will be generated once your unit is ready and will be sent to you with FULL tracking detail from USPS Priority Mail. Also, we will only be shipping out to US Domestic customers initially until we have full assurance that COVID-19 shipping/customs issues are resolved. We simply want to make this great radio available to as many customers as possible and not have units sitting in shipping warehouses, customs offices, or returned. Rest assured, we will certainly be making it available for worldwide purchase soon. Also, LNR does not sell external batteries or power supplies and please contact your preferred supplier for battery options.
Power supply options:
The MTR-4B V2 is designed to put out about 5 watts with a 12.0 V supply. This makes it a good match to a 3S Li-ion pack which produces a bit over 12V when fully charged.
A 2S pack can also be used, with reduced power output. But also with reduced transmit current draw, which will extend battery life. Operation is possible down to the minimum discharge voltage for the cells, about 6V, and still produce over 1 Watt of output power.
A 4S pack produces a bit too much voltage to safely power the rig, but a low dropout regulator can be added to bring the voltage down to one more suitable for the rig.
A 9V smoke alarm battery (once used in transistor radios) can power the MTR-4B for several hours. A tad expensive to do regularly though. But it is fun to see how many contacts you can make using one during a contest sprint. A 9 or 12V battery pack made of AA cells is more long lasting.
A 13.8V bench supply can be used, but this will bring the output power up to 6 to 7 watts. This is fine so long as the SWR is low. At 7 watts, the transmit current is near the maximum the PA FETs can handle and near the point at which the resettable internal fuse will trip (1 A). A high SWR will increase the current in the PA and either trip the fuse or damage the PA.
A simple way of making a 13.8V supply safe to use is to add two silicon rectifier diodes in series with the positive power lead, such as 1N4001 diodes. This will drop the supply voltage to the MTR by about 1.5 volts.
In-line Volume Control accessory: LNR does not sell this, but a popular add-on option is the Koss 155954 VC20 Volume control. It can be purchased from Amazon for $9.99 by clicking HERE.